Selfhosters what is the power draw of your entire setup? And have you done anything special to manage it you’d like to share?
Including all network equipment I use around 110kWh of good ol’ 120V 60Hz USA juice per month. Averaging about 215 watts of power draw for my systems. Nothing amazing, but I like to think that it’s a conservative setup for everything I accomplish with it. I’m paying around $25 a month for my setup. None of that includes my work PC or personal PC, just hosting infrastructure.
Other than trying to make sure all power states are available on my server I haven’t done a lot of power conservation.
I’m curious what you all have.
You must log in or # to comment.
7 or 8w idle for the server. Comes to about 10eur per year. I couldn’t justify using more without feeling like a hypocrite who also advocates for energy conservation.
Nice
What hardware are you running?
11th gen i3 NUC, headless Debian.
NAS sits at 24w idle. Security cams are drawing 19w of poe power, but I suspect there is a bit more being used in total. I have another NUC using probably around 24w max.
I’ll slap some power meters on the switches and main nuc and try get some more accurate numbers.
I’m drawing 4.474kWh per day on average, and drew 139 kWh over the last month.
I have EcoFlow batteries on both A and B PDUs.
Stuff that can be powered off (mining, redundant power supplies) gets the wall outlet feeding ups b and pdu B turned off at 4pm and turned back on at 9pm to align with my time of use rate plan.
My NAS/home server takes about 180 kWH/year, or 20W on average (costs me about 5 Euro/month). This feels like a lot to me and makes up a good chunk of my total energy usage.
What I did to optimize it is mostly select a “low-power” x86 platform, and limit the number of disks. I also decided not to use TrueNAS because it couldn’t let the disks from going to sleep.
The machine hosts 10 TB of usable storage (+RAID 1), syncthing, immich, file server, Influx DB, Grafana, and a few other services.
Yeah I use Unraid for multiple reasons but being able to spin down disks when not in use was a big factor. I have 6 mechanical drives totalling 56TB of usuable storage so it was important to me they don’t all need to be on at the same time. TrueNAS also comes with some other headaches, I like being able to drop in whatever disk I need to for expansion or replacement.
I like being able to drop in whatever disk I need to for expansion or replacement.
I didn’t move that far away (to Debian + ZFS), so that limitation still remains. Although the addition of Raid-Z expansion should alleviate things quite a bit.
Around 1000-1200 watt continuously. Still our electricity cost is less then 0.
Anyway my old 11gen dell power edge servers cause the biggest power draw. But I am not ready to upgrade them due to the current memory shortage.
Mine draws around 15-20 watts. I’m mostly using low-power hardware: a Rock 5b as my main server, a 2tb nvme ssd, a 2tb hdd and a Glinet travel router (fine since i live in an apartment).
I am using a Raspbery Pi 5 8GB as my NAS & homeserver. It is quick and performant enough while having an idle power draw which is not really noticeable on your electricity bill. Very happy with it.
About 300-400 watts. I should put it on a smart plug to track it over time. I have a NAS with 16 HDDs, an outdated super overkill switch that I should replace to save some power, and a few old laptops.
It also might use some more power while transcoding for my PeerTube Instance or Jellyfin, and I have my desktop set up as a remote runner for the PeerTube Instance, so that uses some additional power.
A lot of UPSs will have power metering as well if you’re not already on one.
I am, and it does, that’s how I got the 300-400w estimate. It is connected to the NAS and shuts it down gracefully when power goes out. Wonder if the NAS can also read the power usage over that cable. Might just be easier to use a $15 zigbee plug though to get the data directly into Home Assistant.
If you have a NUT server configured then you can depending on UPS vendor. My APC can and that’s how I pull it into HA.
My server is a OnePlus5T running Post marketOS. It runs AdGuardHime, a Static Website, nginx, and Anubis.
Too much.
38watts and spikes to 65watts from my Synology. My gaming laptop turn proxmox can spike to 350watts but normally sits at 50-75watts.
Averages 50-70 watts. Includes my main NUC NAS thing and all of my networking equipment.
late but i think i lose the thread. The entire house runs at slightly over 1.5kW, and self hosted equipment accounts around 1.2kW of that. The daily cost is only about £2 though due to solarand batteries.
Used to be 200watts bang on but the latest round of updates bumped it up to 210Watts. Everything is on a UPS and I pull measurements from that into an RRD DB (because I like to make my own stuff). It’s kinda cool to see how heavy disk use or CPU intense tasks will increase power draw by up to 50W, or some times or when the power drops off sharply I know my NVR container is not working because 6 ffmpeg tasks all stopped at the same time.
- 1x T330 with 4 disks and 2 dozen services.
- 1x H340 NAS with 2 disks
- 1x PoE switch
- 3x PoE cameras
- 2x Desktop switches
- 1x Desktop router
- 1x Cable Modem
Currently, 2 servers and 2 3d printers, I’m running just over 200w at idle. Depending on what my printers and servers are doing at any given moment, it could go up to 2000w, total, but I haven’t seen that high a power draw since I stopped contributing to Boinc projects about a year ago. I remember finding it mildly amusing that my graphics cards had a higher power draw then my printers.
My budget is under 100w for 3 servers with a combined 18tb of ssd and 28tb of spinning rust that stays spun down unless I need to so a cold backup.
